SKU: Ridgid 41855
UPC: 095691418555
Weight: 96 lbs
RIDGID 41855 300 Power Drive only with foot switch
Details
Ridgid 41855 Includes
- (1) Power Drive only with foot switch
Ridgid 41855 Features
- RIDGID speed chuck
- Reversible 1/2 HP Universal motor
- Capacity: 1/8"-2" (3mm-50mm) pipe, 2-1/4"-4" with 141, and 4"-6" with 161 Geared Threaders; 1/4"-2" (6mm-50mm) rod
- Recessed On/Off/Reverse switch
- CSA Approved
- Approved to UL Standards (NRTLC)
Ridgid 41855 Specifications
| Motor: | 1/2 HP, Universal reversible motor, single-phase, 25-60 Hz, 115V (230V available) |
| Switch: | Heavy-duty FOR/OFF/REV and Integral Foot Switch |
| Chuck: | RIDGID speed chuck with replaceable rocker-action jaws |
| Spindle Speed: | 38 RPM (57 RPM available) |
| Rear Centering Device: | Cam-action turns with chuck |
| Support Bar: | Heavy-duty (2) |
Sizing Your Belt
To size your tool belt, place your existing tool belt on an even surface and measure it from the end of the buckle to the most commonly used hole. Select the belt size (the "mid range" column below) that is closest to your measurement.
If you do not have a current tool belt to measure, you can get an approximate mid range measurement by adding 4" to your pant waist size.
| Size | Mid Range | Approx. Pant Waist | Over All Length |
| Small | 34" | (29" to 32") | 41.5" |
| Medium | 37" | (33" to 35") | 44.5" |
| Large | 41" | (36" to 39") | 48.5" |
| X-Large | 45" | (40" to 44") | 52.5" |
| XX-Large | 49" | (45" to 49") | 57.5" |
| XXX-Large | 53" | (50" to 54") | 61.5" |
CALIFORNIA RESIDENTS:
WARNING Cancer and/or Reproductive Harm – www.p65Warnings.ca.gov